User's Manual

RadioFrame System Method of Procedure GSM/802.11b
Installation
54 RadioFrame Networks, Inc.
Figure 17 Connect the RFU to the ACU, then ensure that the RFU is receiving
power and connectivity from the ACU.
4.3.3 Insert the GSM RadioBlades and iRAPs into the RFU
The GSM RadioBlades and 802.11 iRAPs are shipped several to a box in individually
wrapped antistatic packaging. Each box of RadioBlades/RAPs includes a disposable
antistatic wrist strap to be used when inserting the RadioBlades/RAPs into the RFU.
Refer to the site documentation for the exact slot location of each RadioBlade/iRAP
within the RFU.
1 Unwrap 30 cm (12”) of the disposable wrist strap and wrap the adhesive side around
your wrist.
2 Unroll the rest of the band and remove the liner from the copper tape.
3 Attach the copper tape to the metal card cage inside the RFU.
4 Un-package the GSM RadioBlades to be inserted in the RFU.
5 Insert the GSM RadioBlades, one at a time, into the specified slots (1 through 7,
numbered right to left) in the RFU until the connector on each RadioBlade seats
firmly into the back of the RFU (see the following illustration).