User's Manual

GSM/802.11b RadioFrame System Method of Procedure
Installation
RadioFrame Networks, Inc.
53
Figure 16 Use the provided bracket when mounting an RFU on the ceiling,
ensuring that all bolts or screws penetrate wood.
4.3.2 Connect the RFUs to the ACU
1 Connect the RJ45 port labeled MAIN on the top of the RFU to the ACU using an
RJ45-to-RJ45 CAT-5 cable (see the following illustration).
Caution
Do not remove the protective cover from or use the RFU port labeled AUX. Damage may
occur to the RFU, ACU, or both.
2 Verify that the RFU is receiving power and connectivity from the ACU.
The Link and Activity LEDs on the MAIN port should light as green, and the Activity
LED should blink rapidly indicating connectivity. If the LEDs do not light, verify that
the ACU is powered on.
3 Complete the next procedure “Insert the RadioBlades” before placing the front cover
on the RFU.