User's Manual

RadioFrame System Method of Procedure GSM/802.11b
Appendix E: Connecting to the RFS
114 RadioFrame Networks, Inc.
Configure the FTP Software
FTP (file transfer protocol) server software is required on the workstation. System
Manager uses the FTP protocol as the mechanism to transfer files from the workstation
to the RFN system. The FTP Server software can be obtained via the World Wide Web at
http://www.wftpd.com.
1 Open FTP Server (wftpd32.exe). The following configuration is for WFTPD.
2 In the HyperTerm session, type LL and press Return to verify that the FTP server is
up and running.
You should see a list of files in the C:\ directory for the user ‘board’. If the FTP server
is not running, you’ll get an error message, or ‘value =’, or both.
3 From the Security menu, select General, configure the General Security page as
shown, and then select OK.