User's Manual

GSM/802.11b RadioFrame System Method of Procedure

Appendix C: BCU and ACU Main Rack Installation

RadioFrame Networks, Inc

. 107

Figure 24 Mount the ACU only in an EIA-standard compliant 19” rack.

Connect the ACUs to the BCU

After the main rack has been installed and all wiring for the RFS has been completed,

connect the main rack ACU and all remote ACUs to the BCU.

Connect the RJ45-to-RJ45 CAT-5 cable from Port 2 on the front of the ACUs to the

specified RJ45 port (1-8) on the back of the BCU.

Refer to the site documentation to determine which ACU connects to each port on

the BCU. The Activity and Link LEDs above the ports will remain unlit until each ACU

has been installed and plugged in.

Figure 25 Connect the RJ45-to-RJ45 CAT-5 cable from Port 2 on the front of the

ACU to the specified RJ45 port on the back of the BCU.