User's Manual

RadioFrame System Method of Procedure GSM/802.11b
Operations and Maintenance
94 RadioFrame Networks, Inc.
System Manager Alarm Description Action
COMMANDED RESET System Reset was initiated via
System Manager.
Causes a system reset.
COVERAGE HOLE One BR in a sector has fewer RBs
than other BRs in that sector.
The BR that is short of RadioBlades
has locked.
DHRB RESET A problem in the iRAP has caused it
to reset.
No action required.
DHRB TASK EXCEP Task Exceptions has occurred for
some task on the iRAP.
iRAP resets.
No action required.
DSP 1180 FLOOD The RB 1180 DSP address is
flooding all ports.
Sends a Stop Tx command to the RB
and causes a system reset.
DSP HPI ERROR Problem in accessing HPI interface
for a DSP.
If errors go beyond a threshold,
SPAM is reset.
DSP LOAD ERROR DSP software not found.
DSP was not initialized.
Check the ffs files etc.
DSP LOST PDU DSP is not sending any PDUs to the
APC.
The CPU received fewer than
threshold PDUs within a fixed period
from the DSP.
SPAM is reset.
DSP TX IQ FAIL DSP Tx counter is not incrementing
as per expectations, implying that
DSP has stopped transmitting.
SPAM is reset.
DSP TX NULL PDU DSP is transmitting too many NULL
packets because it didn’t receive
PDUs from CPU.
SPAM is reset.
EXC DSP RESET DSP SPAM has been reset more
than four times within the last 20
minutes.
Causes a system reset.
EXT BR RESET BR received a reset command from
the iSC.
Event logged to indicate that BRs
went down on iSC request.
FAN1 ALARM Chassis FAN1 is malfunctioning. Check chassis fans for proper
ti