$ Visit Radioactivity For Downloads And Help. TABLE OF CONTENTS 1. KNOW ABOUT THIS RADIO 2. HOW TO USE THIS RADIO 02 2.1 Power On/Off the Radio —-- 02 2.2 Volume Control mom — 02 2.3 Mute Effusion 02 2.4 Channel Control 02 2.5 Squelch Level Control —— — 02 MASQUE Conical ooo. 02 2.7 Soda Cork moo moo 03 2.8 Keypad LOOK mmo emo 03 2.9 Emergency Channel 03 2A0VOX mmm mmm mmm 03 211 Sean Function 03 2.12 Frequency Band Selection 04 2.13 Install External Speaker 2.14 Menu Operations 215 CTCSS/DCS Set 2.
Visit Radioactivity For Downloads And Help. [) 4.
Emr rrr 2. HOW TO USE THIS RADIO 2.1 Power On/Off the Radio 1. Short press {f key, the radio emit a prompt and LCD display on. 2. When the radio on, hold [Jl key until nothing appears en LCD and release [Jf] key, the radio will power off. 22 Volume Control 1 short prods [8 or I key to adjust volume, LCD shows for 2 seconds which means volume level. Total Is 27 levels: 2. Hold 8 key can fast increase volume level, hold key can fast decrease volume level. 23 Mute Function 1.
$ Visit Radioactivity For Downloads And Help. 03 3. Hold press {ff or [I key can fast change ASQ level 4 Short press Wl key again or Walt for 2 seconds to store and ext. A » Note: The higher ASQ level dieseled, the stronger signal required io open speaker and hear the calling. 2.7 Mode Control 1. Short press Bl} key to switch between ea / AM mode. 2. The LCD displays the selected mode. 2.8 Kay pad Lock 1. Hold Wl} key for over 3 seconds to lock the keys, em" appears on the LCD, 2.
$ Visit Radioactivity For Downloads And Help. [2D 242 Frequency Band Selection 1. Hold [fl] key while pressing Wi key until full appears on LCD and reseals 2 keys, the current frequency band blinks on LCD; 2. Short press a ol key to choose wanted frequency band; 3. When the frequency band is selected, hold press key to store and exit 2.13 Install External Speaker Choose a 160 external speaker with 3.5mm mono connector.
$ Visit Radioactivity For Downloads And Help. [D LCD Display: Function Denali Setting Details ha) 9 Mic gain control m3 5% squelch scan (default) kr: time scan Gen | Sven HWE VOX sensitivity level | Level: [1 {~ 09 setting Default: 13 UE VOX delay time Level: selling Default: 4 rF9 RF gal level control | oF (defaulter, kok Time out ier of. 0 I~ minim Default: 17 H c Hi-Gut setting °F boi a How rein (default) E nr TX roles reduction eo noise reduction function.
$ Visit Radioactivity For Downloads And Help. [D 2.15 CTCSS/DCS Sat Long press {iY key to enter menu list. Short press [8] or [key to select the CTCDCS menu Short press [i key to validate, the aced type boinks on LED. Short press [8] or [key to select the coda type. oF F: stands for not set. ck = stands for CSS tone. dcG: stands for DCS cods. Short press J key to confirm the code type. The cods value flashes (unless selected) .
