User manual

RD7000+ Operation Manual 3
Section 2 – System overview
2.1 RD7000+ locator
2.1.1 Locator features
1. Keypad.
2. LCD with auto backlight.
3. Speaker.
4. Battery compartment.
5. Accessory slot.
6. Headphone jack.
2.1.2 Locator keypad
7. Power key : Switches the unit on and off.
Opens the locator menu.
8. Frequency key
: Selects frequency.
Closes submenu.
9. Up and down arrows
: Adjusts the signal gain.
Scrolls through the menu options.
10. Antenna key
: Toggles peak, null (PL and TL
models only) and combined peak/null modes.
Open submenu. Prolonged keypress toggles
between depth or current display on the LCD.
2.1.3 Locator screen icons
11. Indicates the signal strength and peak marker.
12. Signal strength: Numeric indication of signal strength.
13. Peak arrows: Indicates the location of the line relative
to the locator.
14. Battery icon: Indicates the battery level.
15. Volume icon: Displays the volume level.
16. Fault-Find arrows (PL and TL models only)
17. Radio Mode: Indicates when Radio Mode is active.
18. Power Mode: Indicates when Power Mode is active.
19. Accessory indicator: Indicates when an accessory is
connected.
20. A-Frame icon: Indicates when the A-Frame is
connected.
21. Operating mode indicator.
22. Compass: Shows the direction of the located cable
relative to the locator.
23. Null / Peak icon: Indicates antenna selection.
24. Sonde icon: Indicates that the signal source is from
a sonde.
25. Line icon: Indicates that the signal source is from
a line.
26. Current / depth indicator.