User manual

RD7000+ Operation Manual 5
2.2 Tx-1, Tx-5 and Tx-10
transmitters
2.2.1 Transmitter features
1. Keypad.
2. LCD.
3. Removable accessory tray.
4. Rechargeable battery pack.
2.2.2 Transmitter keypad
5. Power key : Switches the unit on and off. Opens
the transmitter menu.
6. Frequency key
: Selects frequency. Menu
navigation key.
7. Up and down arrows
: Adjusts the output
signal. Scrolls through the menu options.
8. Measure key
: Toggles measurement display
between volts, current and impedance.
Note: displayed measurements are based on the
currently selected mode or the attached accessory,
if applicable. Opens a submenu.
2.2.3 Transmitter screen icons
9. Battery icon: Indicates the battery level.
10. Alphanumeric description of selected operation mode.
11. Standby icon: Appears when the transmitter is in
Standby Mode.
12. Output level: Displays transmitter output power.
13. Clamp icon: Indicates when a clamp or other plug is
connected.
14. DC icon: Appears when the transmitter is powered
from a DC source.
15. Induction indicator: Appears when the transmitter is
in Induction Mode.
16. A-Frame (Tx-5 and Tx-10 only): Indicates when the
transmitter is in Fault-Find Mode.
17. CD Mode indicator (Tx-10 only): Indicates that the
transmitter is in Current Direction Mode.
18. Voltage warning indicator: Indicates that the
transmitter is outputting potentially hazardous
voltage levels.
19. Volume icon: Displays the volume level.
20. Pairing icon (Tx-5B and Tx-10B only). For use with
RD8000 locators only.
21.
Bluetooth
®
icon (Tx-5B and Tx-10B only). For use
with RD8000 locators only.