User Manual

4-2
DrillTrack G2 Function keys
Information key
Press to display the information screen.
The information screen displays:
- Selected DataSonde operating frequency;
- DataSonde battery status;
- DataSonde operating temperature;
- Receiver software version;
- Receiver battery status;
- User selected Locate Orientation (F or B).
Setup Mode
While the Receiver is turned off press and hold the
Information key then press the On / Off key to switch
the unit on and enter into the SETUP Mode.
(for Setup Mode instructions see page 5-1)
DataView
On / Off key
Press to switch the DrillTrack G2 DataView On or Off
Backlight On / Off
Press to illuminate the DataView backlight.
The backlight will only illuminate when data is being displayed.