User's Manual

PDL-4 A.C.ID-M System (with GPS) User Guide
Page 2
SmartProbe-2
When pushed into the ground in close proximity to
the target cable, and activated, the SmartProbe-2
receives the applied A.C.ID-M signal and relays
A.C.ID-M status information to the PDL-4 via a short-
wave radio link.
Extended Range SmartProbe-2
The extended range SmartProbe-2 is used to locate
cables that are buried too deep to be located by the
standard SmartProbe-2. The extended range
SmartProbe-2 operates in the same way as the
standard SmartProbe-2 except for an LED (Light
Emitting Diode) that illuminates when the unit is
activated.