User's Manual

PDL-4 A.C.ID-M System (with GPS) User Guide
Page 24
Press the Cancel menu key or the Exit key to return
to the System Utilities menu screen (without
restoring defaults).
After the defaults are restored 'System defaults
restored' is displayed for five seconds (unless any
key is pressed or the gain control is operated) and
the receiver enters the operating mode last used.
Self-Test
To initiate a Self-Test, press and hold the On/Off key
for four seconds or select it from the System Utilities
menu.
If the Self-Test was initiated at Power-up the PDL-4
will enter Cable Locate mode on completion of the
Self-Test.
If the Self-Test was initiated from the System
Utilities menu, control returns to that menu on
completion of the Self-Test.
During the Self-Test a list of the automated tests
performed and their results are displayed. The
'Performing Self-Test' progress bar is displayed.
On completion of the automated Self-Test, a Pass or
Fail screen is displayed with the prompt 'Press any
key'.
Pressing any key displays the Optional Tests screen
which allows selection of additional manual tests or
'Exit' to stop further testing.