User's Manual

PDL-4 A.C.ID-M System (with GPS) User Guide
Page 13
To deploy the arm, release the catch on the carrying
handle and lift the arm at the green button end of the
VectorBar 20. Continue lifting the arm until it is fully
extended and locks into the fully deployed position.
When the arm is fully deployed, the green LED next
to the swivel mechanism will illuminate. To stow the
arm lift it at the free end until it swings back into the
fully stowed position. Engage the catch in the
carrying handle.
Graduations
Graduations are provided on the side and top of the
VectorBar 20 as a guide to the exact location of the
cable or pipe.
SmartProbe-2 Operation
Green Button
Press and release to activate the SmartProbe-2.
When the extended range SmartProbe-2 is
activated a red LED, located on the head of the unit,
will illuminate to indicate activation.
To select a specific A.C.ID-M code press the green
button until the correct code is displayed on the
PDL-4.
Depth Graduations
Graduations are provided as a guide to the depth of
ground penetration.