User's Manual

PDL-4 A.C.ID-M System (with GPS) User Guide
Page 12
Direct Selection
Direct Selection allows quick selection of any menu
item from a list, without having to use the menu
structure.
Press and hold the Exit key for one second to
display the Direct Selection screen.
Select the function required by rotating the Gain
Control to move the highlight bar down (clockwise)
or up (anti-clockwise) then access that function by
pressing the Select key.
VectorBar Operation
Green Button
Press and release to activate the VectorBar - the
adjacent LED will illuminate.
To select a specific A.C.ID-M code press the green
button until the correct code is displayed on the
PDL-4.
To de-activate the VectorBar press and hold the
green button for approximately 5 seconds or until the
red LED extinguishes.
Graduations
Graduations are provided as a guide to the exact
location of the cable or pipe.
VectorBar 20 Operation
Green Button
Press and release to activate the VectorBar 20 - the
adjacent red LED will illuminate.
To select a specific A.C.ID-M code press an release
the green button until the correct code is displayed
on the PDL-4.
To de-activate the VectorBar 20 press and hold the
green button for approximately 5 seconds or until the
red LED extinguishes.
Arm
The VectorBar 20 must only be used with the arm
fully stowed or fully deployed. Do not use the
VectorBar 20 if the arm is not in one of these two
positions.