User's Manual

PDL-4 A.C.ID-M System (with GPS) User Guide
Page 9
On the screen, "SV's 5" (Solar Vehicles) refers to the
number of satellites used to calculate the position
during a Cold Start. This number will be 5 or more,
depending on the number of satellites providing cover
at the time of the fix.
Display Fix
Selecting Display Fix will give a read-out of the current
GPS position of the locator. Performing a Display Fix
is similar to the procedure for a Cold Start. Instead of
pressing the key next to the Cold Start icon, press the
key next to the Display Fix icon. The screens will look
similar to those of the Cold Start.
Cable Locate Mode
The Cable Locate screen displays the following:
• Bar Graph - Received signal strength, Peak or
Null.
• Percentage representation of Bar Graph selection
Indication
• Selected gain
• CD arrow - Forward or Reverse
• Cable Orientation Indicator
• Left/Right arrows - Null only
§ Selected frequency
§ Peak/Null indication
§ Battery level indication - five levels
§ Speaker Volume - four levels including Off.
§ Date, Time and Time Zone
§ GPS icon.
Menus
To access the top-level menu screen whilst in Cable
Locate Mode press the exit key.
The top-level menu screen displays the following options:
• System Menu.
• Confirmation Mode.
• Cable Locate.
System Menu
To select the System menu press the key next to the
System Menu arrow.
System menu options are displayed as follows:
• Volume, Contrast, Backlight, Clock (System Setup).
• Upload, Download, Defaults, Test (System Utilities).
• User Preferences.
• PDL-4 Information.
Options are:
• Volume -
Off, Low, Med, High.