User`s guide

RT-RoIP2 User’s Guide
Copyright © 2011-2013, Radio-Tone Company Limited. All Right Reserved.
4
4. Radio Unit Terminal
This terminal is used to connect to a radio unit.
5. Mode Selection Switch
DIP SW1 : Radio Unit PTT Control Mode Selection. OFF for PTT Mode 1. ON for PTT Mode 2.
DIP SW2 : Carrier Handover Time Selection. OFF for <1/2 seconds. ON for 2 seconds.
6. Ethernet Terminal
This terminal is used to connect to 10/100-Base-T IP network.
7. DC5V Terminal
This terminal is used to connect to AC Adapter.