RT-RoIP2 User’s Guide Radio Over IP Network Gateway RT-RoIP2 User’s Guide Copyright © 2011-2013, Radio-Tone Company Limited. All Right Reserved.
RT-RoIP2 User’s Guide Important Notice Thank You Notice Thank you for purchasing RT-RoIP2 Radio Over IP Network Gateway. Please read this User’s Guide carefully before putting RT-RoIP2 into operation. Support for the RT-RoIP2 is available by email. Please direct all questions via email to support@radio-tone.com. Your question(s) will be answered promptly. Electrical shock hazard Never attempt to connect the unit to any power network other than one for which it was intended.
RT-RoIP2 User’s Guide Contents Preface Key Features Product Descriptions Installations Operations Specifications Preface The RT-RoIP2 Radio-over-IP Network Gateway is the world’s first standalone Zello Radio-Radio-Over-IP Gateway. It is a cost effective and excellent performance equipment for using to connect mobile phone and 2-way radio users, or bridge 2-ways radio systems across sites. The RT-RoIP2 is equipped with the Radio-Tone Intelligent Digital Audio Tracking System(iDats), the Android 4.
RT-RoIP2 User’s Guide Product Descriptions Packing List RT-RoIP2 Radio Over IP Network Gateway x 1 Ethernet Connection Cable x 1 Radio Unit Connection Cable x 1 This User's Guide x 1 Major Operating Controls, Terminals and Their Functions 1. LCD This is a 4.3 inch touch screen LCD for displaying and on screen controlling the system. 2. MENU Button This is the MENU button for pop up the Android OS setup menu and apps setup menu. 3.
RT-RoIP2 User’s Guide 4. Radio Unit Terminal This terminal is used to connect to a radio unit. 5. Mode Selection Switch DIP SW1 : Radio Unit PTT Control Mode Selection. OFF for PTT Mode 1. ON for PTT Mode 2. DIP SW2 : Carrier Handover Time Selection. OFF for <1/2 seconds. ON for 2 seconds. 6. Ethernet Terminal This terminal is used to connect to 10/100-Base-T IP network. 7. DC5V Terminal This terminal is used to connect to AC Adapter. Copyright © 2011-2013, Radio-Tone Company Limited.
RT-RoIP2 User’s Guide Installation Simple System Connection Diagrams Note: The connected Radio Unit MUST be used external antenna to reduce the TX RF signal affect to the system equipment. Connect the Radio Unit to an external antenna. Connect the RT-RoIP2 to a Radio Unit by using the bundled connection cable. Connect the RT-RoIP2 to an IP network by using the Ethernet cable. Turn on the Radio Unit and adjust its volume to approximate 1/3 position of maximum level.
RT-RoIP2 User’s Guide Setup Zello App The Zello app was preset with below settings by default. You just need to add a Zello account to operate. If the settings are changed, please setup again with reference to below steps. Run the Zello app Press the [MENU] button to pop-up the setup menu. Press the [Options] item to open the Options setup menu. Press the [Alerts] item. Uncheck all check boxes. Press the [BACK] button to exit. Press the [Interface] item.
RT-RoIP2 User’s Guide Operation When the system is installed, the Radio Unit and the apps are configured, the system is ready to use now. Zello Gateway and Link System Run Zello app Add contact(s) or channel(s) Press a contact or a channel for standing by calls. Now the RT-RoIP2 is standing by calls from other mobile phones, 2-way radios from remote RT-RoIP2 sites and local 2-way radios. Skype Gateway System Run Skype app Press the [Contacts] Add contact(s).
RT-RoIP2 User’s Guide Specifications Power Supply : DC 5V Power Consumption Ethernet : 800mA (Typical) : 10/100 Base-T CPU Display : ARM : 4.
RT-RoIP2 User’s Guide Notes: Copyright © 2011-2013, Radio-Tone Company Limited. All Right Reserved.
RT-RoIP2 User’s Guide Notes: Copyright © 2011-2013, Radio-Tone Company Limited. All Right Reserved.
RT-RoIP2 User’s Guide RT-RoIP2v3-ug1 Copyright © 2011-2013, Radio-Tone Company Limited. All Right Reserved.
