User's Manual

4 1-800-732-2677
How the Wireless Crate
™
Works
The Wireless Crate is designed to work with existing Radio Systems PetSafe Receiver Collars. If you
have a Radio System PetSafe In-Ground Fence, your collar will also work with the Wireless Crate,
eliminating the need for separate collars.
The Wireless Crate functions by detecting the dog on the crate and signaling the dog through a
choice of tone or mild static stimulation if the dog exits the crate without your permission. If the dog
leaves the crate without permission while the unit is turned on, the collar will produce either a toned
beep to signal your dog or warning beeps accompanied with a mild static stimulation. The correction
type depends on the setting you choose. Once the dog returns into the crate, the tonal beep or static
stimulation ceases.
Preparation and training is required for optimal and safe results. Please continue reading this manual
before attempting to use this product with your pet.
Operating Guide
Familiarization and Preparation
Please take a moment to familiarize yourself with the Wireless Crate
™
and its controls before using this
product with your pet.
Switch
The Wireless Crate
™
has a three-way sliding
switch that allows you to turn on the unit and
control the type of correction.
Battery Installation
Make sure the switch is in the “OFF” position.
Remove the fabric covering the Wireless Crate
™
.
Open the battery door and install 4 AA batteries
(batteries are not included) as shown below.
Replace the battery door and fabric cover.
No Beep
No Correction
Beep Only
Beep and
Static Correction
Indicator Light