Specifications

Mailing: PO Box 3526, Bellevue, WA 98009
Shipping: 13737 SE 26th St., Bellevue, WA 98005
Toll-Free: 800-259-7331 • Phone [phone] • Fax: [phone]
www.sgcworld.com • Email: [e-mail]
27
5.2 General Applications
Most of the loop antennas described can be used anywhere, on board
boats, aircraft and cars.
For example,
the loop an-
tenna can be
configured on
a sail boat
from the top
of the mast to
the front or
back of the
vessel, with
the coupler
located on the
deck avoiding
installation of
expensive
backstay iso-
lators.
On an airplane the
antenna could be
configured using a
single or multi-loop
triangular configu-
ration from the
cockpit to the top
of the tail. Antenna
wire supplied could
be replaced by
stronger bronze phosphorus cables (for airplanes faster than 80 miles
per hour).
Isolator
Isolator
Wire goes to
the coupler
Wire antenna
Ground
Radio
Aviation
control
head
Coupler
Wire antenna
Fixed Wing Aircraft
Radiation
Lower mast connection
to coupler RF ground
Vessel
Groundless
Loop
Coupler
SEARCH KIT Manual
page 27
Tuesday, March 26, 2002 13:21
Composite