Specifications

Mailing: PO Box 3526, Bellevue, WA 98009
Shipping: 13737 SE 26th St., Bellevue, WA 98005
Toll-Free: 800-259-7331 • Phone [phone] • Fax: [phone]
www.sgcworld.com • Email: [e-mail]
16
© March 2002 - SGC, Inc.
• Form the antenna wire into the approximate desired shape and
size and slightly knot the ends of the wire together for later at-
taching to the coupler.
• Attach four support ropes at corners of antenna using the supplied
antenna clips. The wires will easily snap into the clips.
• Raise the antenna as much as possible and secure the ropes.
• Secure the lower corners of the antenna.
The two loops of
the antenna
wire have been
strapped into a
support clip.
The antenna,
which was
formed on the
floor, is being
raised to its
final position.
SEARCH KIT Manual
page 16
Tuesday, March 26, 2002 13:14
Composite