Product Manual

petsafe.com 11
Transmitter Range Chart
Boundary Control Dial Position Boundary Switch LOW – Boundary Switch HIGH +
1 5 ft. 5 ft.
2 10 ft. 20 ft.
3 15 ft. 35 ft.
4 20 ft. 50 ft.
5 25 ft. 65 ft.
6 30 ft. 80 ft.
7 40 ft. 95 ft.
8 50 ft. 105 ft.
Note: These distances are approximate.
Record Your Settings
Location
Final Boundary Switch
Setting (HIGH + or LOW – )
Final Boundary Control Dial
Position (1–8)
Receiver Static
Correction Level (1–6)
Home
Camping
Vacation
Other
Step 4: Place the Boundary Flags
The boundary flags are visual reminders for your pet of where the boundary zone is located. The receiver collar will activate within 2 to 3 feet
of the boundary flags.
1. Using the test light, with the static correction level set at 2 or greater, hold the receiver collar at your pet’s neck height with logo side facing
away from the transmitter.
2. Walk towards the boundary zone until the receiver collar beeps and the test light flashes (4A).
3. Place a boundary flag in the ground (4B).
4. Walk back into the pet area until the beeping stops.
5. Repeat this process around the boundary zone until it is marked with boundary flags every 10 feet.
The boundary flags may be in different parts of the boundary zone and may not be in a line. The boundary zone is 2 to 3 feet wide.
4A 4B