Radio Systems Millenium Digital Console Livewire® Model Additional Operating Instructions 601 Heron Drive • Logan Township, NJ 08085 Phone: 856-467-8000 • Fax: 856-467-3044 www.radiosystems.
Page 2 Radio Systems Millenium-D Livewire Console Radio Systems Millenium-D Livewire® Console Installation and Operation Manual Radio Systems Millenium Digital- Livewire® Broadcast Manual — Part # MAN-MILLCONLIV Manual Revision 02-29-2012 for serial numbers 100859 and higher Utilizing Millenium Livewire Digital Console Software V1.3.1.1 New features and modifications in Millenium Livewire version 1.3.1.1 1. Multiple GPIO Livewire profiles supported. 2.
OUTPUT GROUNDING JUMPERS JU1 JU2 JU3 JU4 JU5 JU6 JU7 JU8 JU9 JU10 IN Analog Output 7 Analog Output 8 JU39 JU40 J1-J10 Connect left and center pins for inside ground Connect center and right pins for chasis ground (See Manual for Grounding Instructions) JU26 JU38 JU25 JU37 Analog Input 8 JU24 JU36 JU23 JU35 Analog Input 7 JU22 JU34 JU21 JU33 Analog Input 6 JU20 JU19 JU32 Analog Input 5 JU18 JU31 Analog Input 4 JU17 JU30 JU16 JU29 Analog Input 3 JU15 7L JU28 JU
Radio Systems Millenium-D Livewire Console 1.0 Millenium Source Profile Properties Define, allocate to various faders and label sources (Axia inputs to the Millenium Livewire Console). 1.1 Setting Up 2-Way (mix-minus) source profiles 2.0 Millenium Scene Properties Name and define up to 8 front panel selectable scene presets (and startup default “scene”). 3.0 Console Outputs (Livewire Sources) Name, define and label destinations (Millenium Livewire Console outputs to Axia Livewire). 4.
Page 5 Radio Systems Millenium-D Livewire Console Millenium Source Profile Properties Define and allocate to various faders and label sources (Axia inputs to the Millenium Livewire Console)
Radio Systems Millenium-D Livewire Console Millenium Scene Properties Name and define up to 8 front panel selectable scene presets (and startup default “scene”) Page 6
Radio Systems Millenium-D Livewire Console Console Outputs (Livewire Sources) Name, define and label destinations (Millenium Livewire Console outputs to Axia Livewire) Page 7
Radio Systems Millenium-D Livewire Console Console Inputs (Livewire Destinations) Select and label sources (Axia inputs to the Millenium Livewire Consoles) Page 8
Page 9 Radio Systems Millenium-D Livewire Console GPI Channel Assignment Select 1-8 Livewire sources that you wish to control (start/stop) or to control (turn on/off) console channels.
Page 10 Radio Systems Millenium-D Livewire Console GPI Pin Assignments For each (of eight) GPIO control sources, use this sub-screen to map up to five input and five output physical pins on the RJ-21 GPIO connector. Note that pins can be multiply assigned to different GPIO ins and outs, but that this is not recommended. Consult details on page 19.
Page 11 Radio Systems Millenium-D Livewire Console Livewire / QoS Quality of service parameter selections
Page 12 Radio Systems Millenium-D Livewire Console Livewire I/O Meters Level test meters and input gain trims for all sources and destinations
Page 13 Radio Systems Millenium-D Livewire Console System IP, password, and software update options Note: Default username is “user,” default password is “user.” See last page of manual for password reset in case of forgotten password.
Page 14 Radio Systems Millenium-D Livewire Console Millenium - Livewire Console Software Creating Backstreams (Mix-Minus feeds for 2-way devices) Gaining Perspective A Millenium output is a Source (input) to Livewire. A Millenium input is a Destination (output) of Livewire. Nomenclature assumes the Livewire network as the point of reference, so; A Livewire Destination is an Input to the Millenium Console. A Livewire Source is an output from the Millenium Console.
Radio Systems Millenium-D Livewire Console Page 15 Remote Control - “GPIO” Interface Overview The Millenium Axia internal console node features a GPIO connector with 16 inputs and 16 outputs. Via programming these inputs and outputs can be assigned to any network audio source. In this way, the Millenium Livewire console channel can exercise start/stop control or a device can turn a Millenium console channel on and off when selected as a source on the LCD display above that fader.
Page 16 Radio Systems Millenium-D Livewire Console GPIO Operator’s Microphone Logic Name Pin Type Notes INPUTS ON Command IN-1 Active Low Input Turns channel ON OFF Command IN-2 Active Low Input Turns channel OFF TALK (to Monitor 2) Command IN-3 Active Low Input Activates the Element TALK to MON2 function and routes mic audio to the Talkback bus MUTE Command Mutes channel outputs IN-4 Active Low Input TALK (to PREVIEWED SOURCE) IN-5 Active Low Input Command
Page 17 Radio Systems Millenium-D Livewire Console GPIO Control Room Guest Microphone Logic Name Pin Type Notes INPUTS ON Command IN-1 Active Low Input Turns channel ON OFF Command IN-2 Active Low Input Turns channel OFF TALK (to CR) Command IN-3 Active Low Input Mutes channel outputs and routes source audio to PVW speakers MUTE Command Mutes channel outputs IN-4 Active Low Input TALK (to SOURCE) Command IN-5 Active Low Input Activates the TALK button on e
Page 18 Radio Systems Millenium-D Livewire Console GPIO Line Input Logic Name Pin Type Notes INPUTS ON Command IN-1 Active Low Input Turns channel ON OFF Command IN-2 Active Low Input Turns channel OFF & sends 100 msec STOP pulse PREVIEW Command Turns preview ON IN-3 Active Low Input RESET Command IN-4 Active Low Input “Turns channel OFF, while not sending a STOP pulse” READY Command IN-5 Active Low Input Illuminates OFF lamp to indicate source’s readiness OUTPU
Page 19 Radio Systems Millenium-D Livewire Console Millenium Livewire Console Output Wiring “GPIO” Wiring Pin-Out (controlGPI signals from the console) 680 Ohms 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Output #1 Output #2 Output #3 Output #4 Output #5 Output #6 Output #7 Output #8 Output #9 Output #10 Output #11 Output #12 Output #13 Output #14 Output #15 Output #16 Input #1 Input #2 Input #3 Input #4 Inpu
Page 20 Radio Systems Millenium-D Livewire Console Password Reset for Livewire Browser Screens Millenium Network Console Password Reset for Livewire Browser Screens • Locate the gray Millenium RS-232 adapter shipped with your console originally; it is a DB-9 to RJ45 adapter (pinouts below). Use a standard Ethernet patch cord of sufficient length to go between your PC and the console.
