Product Description

Invisible Fence

Brand

Boundary Plus

2.0 System

Field Test Plan

9 of 20

U:\My Documents\Invisible Fence\Field Testing\Boundary Plus 2.0\Pre-Pilot-1\191002co Boundary Plus 2_0 Field Test Plan.docx

The information below shows the data that is programmed into a receiver as options and transmitter

interactions are set up.

1. Receiver serial number (0C98000068)

a. 0C98 = Boundary Plus 2.0 Gen 1 Receiver

b. 000068 = Serial number (hexadecimal)

2. Receiver Device ID (01089)

a. 10 (010) Network ID

b. 89 Receiver ID #

3. Hub Device ID (01096) – The Hub this receiver communicates with

a. 10 (010) Network ID

b. 96 Hub ID #

4. Frequency – 20000 (20 kHz)

5. Mapped Shields transmitters – Shields with Device ID’s of 01001, 01002, 01004 and

01008. Each of the receiver’s settings are unique to the Shields it interacts with.

6. Mapped Hub/Transmitter – Device ID 01096

NOTE: Both network IDs are the same - 010

[C],PRINTNV[NV],0x03,0x01,0x00000D00,0x0C98,0x00000068

[NV],1089,1096,0,0,0,0,ENABLERF,0,20000,-0.75,1.00,1.06

[NV],1,0x00040000,0x00000000,0x00000000,0x00000000,0

[NV],0x00000000,0x00000000,0x00000000,0x00000000

MAPID: 0: 0x00000000: 0,0,0,0,0,0,0,0: 0,0,0,0

MAPID: 1: 0x00A25214: 0,0,1,1,2,5,2,10: 0,0,0,0

MAPID: 2: 0x00721212: 0,1,0,1,2,1,2,7: 0,0,0,0

MAPID: 3: 0x00000000: 0,0,0,0,0,0,0,0: 0,0,0,0

MAPID: 4: 0x00816016: 0,1,1,1,0,6,1,8: 0,0,0,0

MAPID: 5: 0x00000000: 0,0,0,0,0,0,0,0: 0,0,0,0

MAPID: 6: 0x00000000: 0,0,0,0,0,0,0,0: 0,0,0,0

MAPID: 7: 0x00000000: 0,0,0,0,0,0,0,0: 0,0,0,0

MAPID: 8: 0x00511012: 0,1,0,1,0,1,1,5: 0,0,0,0

MAPID: 9: 0x00000000: 0,0,0,0,0,0,0,0: 0,0,0,0

MAPID: 10: 0x00000000: 0,0,0,0,0,0,0,0: 0,0,0,0

MAPID: 11-94

MAPID: 95: 0x00000000: 0,0,0,0,0,0,0,0: 0,0,0,0

MAPID: 96: 0x00532012: 0,1,0,1,0,2,3,5: 0,0,0,0

MAPID: 97: 0x00000000: 0,0,0,0,0,0,0,0: 0,0,0,0

MAPID: 98: 0x00000000: 0,0,0,0,0,0,0,0: 0,0,0,0

MAPID: 99: 0x00000000: 0,0,0,0,0,0,0,0: 0,0,0,0

2, 3, 4