Product Description

Invisible Fence
®
Brand
Boundary Plus
®
2.0 System
Field Test Plan
6 of 20
U:\My Documents\Invisible Fence\Field Testing\Boundary Plus 2.0\Pre-Pilot-1\191002co Boundary Plus 2_0 Field Test Plan.docx
4 Setup and Operation Instructions
Desktop App
The Desktop App used for this field test will only be used for field testing. It is not a representation of the
final application. Parts of the App function but should not be used while some options are available but do
not link to anything. Selecting options that are not being tested “should” not cause damage to the devices,
however, doing this could put devices into modes that invalidate the test. Reporting on issues outside of
the testing protocol will not be helpful.
NOTE: App has been updated multiple times. Unused functions may no longer be available.
Click the following link: BP2TechnicianApp-0.0.0.8-windows-installer
1) An install file will download to your computer.
2) Double click the .exe file and follow prompts to install the App.
This file will be at the bottom of your screen or in the Downloads folder.
3) A shortcut will be saved to your desktop.
This shortcut will overwrite previous versions of the App on the Desktop.
NOTE: It will not overwrite previous versions pinned to the taskbar. Remove
the pinned shortcut and re-pin the new App.
Reminder: This is a field test only Application. Closing and reopening the App may be required when
switching devices. It is recommended that you connect the device first then open the App.
Device Program Tools
Similar to the Invisible Fence
®
Brand GPS containment system, the Boundary
Plus
®
2.0 devices require program tools, Image 1, to establish communication with
devices in order to set system configuration, update firmware, view and adjust
settings and view diagnostics. A new program tool has been developed for use
with the receiver and will function similar to the GPS 3.0 Programming Tool. The
GPS 3.0 Programming Tool (RIF00-16436), used with the GPS Mobile unit, will
be used to access the configuration memory of the 4 Port Host transmitter and the
2 Port Host Shields
®
Wired & Wireless transmitters. The program tools
connect to the computer and devices the same as with the GPS system.
Boundary Plus 2.0 Receiver and Battery Module
The Receivers and Battery Modules you received are the 2
nd
Pre Pilot
build in production level plastics. Not all of the receiver features
have been implemented, however, form, fit and function of the
Receiver/Battery Module is in its final state pending feedback. Part
of this field test will be to evaluate the look, feel and first impression
ruggedness of the Receiver and Battery Module.
Shortcut
Image 1
Image 2