Product Description

Invisible Fence

Brand

Boundary Plus

2.0 System

Field Test Plan

10 of 20

U:\My Documents\Invisible Fence\Field Testing\Boundary Plus 2.0\Pre-Pilot-1\191002co Boundary Plus 2_0 Field Test Plan.docx

Boundary Plus

2.0 4 Port Host Transmitter

The 4 Port Host is similar to the motherboard of a computer. Just like peripherals of a computer system

(i.e. hard driver, RAM, Bluetooth, etc.), the 4 Port Host has four ports to access different peripherals. Port

1 consists of an onboard 150 MHz RF device used to communicate to and from other Invisible Fence

Brand connected devices. Port 2 supports a removable Wi-Fi module used to communicate with the end

user’s router. Port 3 supports a removable transmitter module used to drive BP 2.0 signal on the loop

wire. Port 4 (future use) will support a removable GPS module that will add GPS Base Reference to the

system.

Refer to image 5:

1) Loop Error/WiFi/Dog Out Indicators

2) Alert Silence/WiFi Button (bottom half of the display)

3) Port-1, 150 MHz RF Radio, RF cable, RF antenna

4) Port-2 Edge Card Connector, Transmitter Module, Loop Connector

5) Port-3 Edge Card Connector, Wi-Fi Module, WiFi Antenna

6) Port-4 Edge Card Connector, GPS Base Reference

7) Program/BBU Port (GPS Battery)

8) Mounting Clip

9) Power Connector, Indoor Avoidance Adaptor

Image 5