Owner`s manual

Adding three video sources to the signal

OPERATION

1. Turn on the TV and set it to either Channel 3 or 4, whichever is

not used for regular broadcasts in your area.

2. Set the RF Modulator’s

CHANNEL 3/4

switch to the same

channel you set the TV (3 or 4).

3. Turn on the connected video source and set

OHMS 75/1K

the RF Modulator to the position that gives the best picture. The

video signal indicator on the RF Modulator lights when the

modulator is receiving a signal from an A/V source.

Note:

To watch the TV broadcast, turn off all other video sources.

CARE

Keep the RF modulator dry; if it gets wet, wipe it dry immediately.

Use and store the RF modulator only in normal temperature environ-

ments. Handle the RF modulator carefully; do not drop it. Keep the

RF modulator away from dust and dirt, and wipe it with a damp cloth

occasionally to keep it looking new.

Modifying or tampering with the

RF modulator

’s internal components

can cause a malfunction and might invalidate its warranty and void

your FCC authorization to operate it. If your

RF modulator

is not

performing as it should, take it to your local RadioShack store for

assistance.

Note: To watch the TV broadcast, turn off the

DVD player and set the A/B switch to

Catalog # 15-1968