User`s manual

3 Function Operation

3.1 Deleting all photos

Press Mode Button repeatedly until” ” appears, and then

press Snap Button once. With the figure on the LCD display

flashing, press Snap Button again to confirm the deletion.

3.2 Deleting Single Photo (Only Deleting the Last Photo)

Press Mode Button repeatedly until “ ” appears, and then

press Snap Button once. With the figure on the LCD display

flashing, press Snap Button again to confirm deletion. After

deleting the last photo, the photo capacity will increase by

one.

3.3 Switching to CIF Format

Press Mode Button repeatedly until “ ” and “MODE” appear,

and then press Snap Button to confirm. LCD display also

shows “ ” when you turn on the camera.

3.4 Switching to QCIF Format

Press Mode Button repeatedly until “

” and “MODE” appear,

and then press Snap Button to confirm. LCD display also

shows “

” when you turn on the camera.

3.5 Switching Frequency to 50Hz Mode

Press Mode Button repeatedly until “ ” appears, and then

press Snap Button to confirm. When taking photos in a room

with fluorescent lighting, in countries where the AC voltage is

220V, use the 50Hz Frequency Mode.

3.6 Switching Frequency to 60Hz Mode

Press Mode Button repeatedly until “ ” appears, and then

press Snap Button to confirm. When taking photos in rooms

with fluorescent lighting, in countries where the AC voltage is

110V, use the 60Hz Frequency Mode.

- 6 -