Specifications

Appendix A - Connector Pinouts
Page 67
A. Appendix A - Connector and Cables
A.1. Connector Pinouts for the AO/SCOPE port:
Pin Number Function
1 Chassis Ground
2 External CFW Pulse/AO Data Out
3 Plus X (Active Low Open Collector)
4
4 Plus Y (Active Low Open Collector)
5 Signal Ground
6 Minus X (Active Low Open Collector)
7 Minus Y (Active Low Open Collector)
8 +12 Volts Out (100mA max shared with I2C AUX)
9 +5 Volts Out (500mA max shared with I2C AUX)
Shell Chassis Ground
Table A1 Telescope Connector
A.2. Connector Pinouts for the power jack:
Pin Number Function
Shell Earth / Chassis Ground
1,5,6 +12V, 6A
2,3,4 DC Return
Table A2 Power Connector Power Jack – Research Series Cameras
A.3. Connector Pinouts for the I2C AUX port:
Pin Number Function
1 +5V DC (500 mA max shared with AO7/CFW8)
2 Open collector output
3 Serial Clock
4 Serial Data
5 Signal Ground
6 TTL input
7 Open collector output
8 +12V DC (100mA max shared with AO7/CFW8)
9 +3.3V DC (500mA max)
Shell Chassis Ground
Table A3 I2C Accessory Port
4
The Open Collector outputs can sink 100 mA maximum