Owner`s manual

15
TROUBLESHOOTING
If your CB is not working as it should, follow these suggestions to see if you can elim-
inate the problem. If you cannot, take the CB to your local RadioShack store for as-
sistance.
Symptom Check/Try
CB has trouble receiving. Turn transceiver power on.
Microphone connected? Secure connections.
Antenna connected? Secure connections.
Too much squelch? Adjust as needed.
Radio not on operating channel? Switch to an active
channel.
PUSH TO TALK held down? Release PUSH TO TALK.
Adjust
VOLUME.
CB has trouble transmit-
ting.
Turn transceiver power on.
Antenna connected? Secure connections.
All connections free of corrosion? Clean and tighten.
Microphone connector loose? Firmly press in jack.
Radio not on operating channel? Switch to an active
channel.
PUSH TO TALK fully pressed? Press completely.
Radio does not work at all. Power connected? Secure connections.
Microphone connected? Secure connections.
Fuse needs replacing? Replace with identical fuse.
See “Replacing the Fuse” on Page 18.
Cannot select a channel. Set
OUT CH9 CH19 to OUT.
PUSH TO TALK pressed? Release PUSH TO TALK.
21-1703.fm Page 15 Wednesday, June 2, 1999 4:35 PM