Owner`s manual

3. Insert two fresh AAA batteries, as indicated by the

polarity symbols (+ and –) marked inside the com-

partment.

4. Replace the cover and slide

LOCK

on both sides

toward the back of the pager.

Note:

The pager retains pager codes in memory without

power for up to 1 year.

Recharging Batteries in the Pager

A battery charger (Cat. No. 17-6025) specially designed

for use with the 17-6024 pager is available at your local

RadioShack store. It can hold and charge up to six 17-

6024 pagers. Follow these steps to recharge batteries:

1. Place the pager with nickel-cadmium or nickel-metal

hydride batteries installed in one of the charger’s

slots.

2. Slide the charger’s switch to Ni-Cd (for nickel-

cadmium batteries) or Ni-MH (for nickel-metal

hydride batteries).

3. Charge the batteries for 14–16 hours. The charging

indicator lights green when charging is completed.

17-6024.fm Page 4 Friday, August 6, 1999 11:00 AM