Owner`s manual

22
USING PANIC
When an emergency occurs, you can
set the radio to generate an alarm
sound for safety. Ô
1. To activate alarm sound, press and
hold
PANIC (about 0.5 seconds).
Release
PANIC when the warning
tone sounds and the radio
vibrates.
2. After the warning tone sounds and
and the radio vibrates (about 2
seconds), the radio generates an
alarm sound.
3. To stop alarm sound, press and
hold
PANIC (about 2 seconds) until
alarm stop and
“STOP” appears on
the LCD.
USING THE SWIVEL-BELT
C
LIP
Toattachthebeltclip,inserttheclip
into the socket at the back of the radio
until it clicks. To remove the belt clip,
press the button at the tip of the clip
and pull out the clip.
Ô NOTE Ô
• You can activate the
alarm even if the
radio is turned off
(rotary switch Off) or
the battery is
charging or the
battery is low.
• During the warning
tone and vibration
period, press PANIC
once to stop the
warning tone and
vibration.