Owner`s manual

17
USING COURTESY TONE
You can set your radio so the person
you are communicating with will hear a
tone when you finish transmitting. To
turn on the radio courtesy tone, press
MENU repeatedly. appears and ON/
OFF flashes on the display. ON appears
when the courtesy tone is on, and
OFF
appears when the courtesy tone is off.
Press
e
or
d
to turn the courtesy tone
on or off. Press
PTT to store the setting.
USING A HEADSET
You can make or answer calls with
hands-free convenience using an
optional headset with a
3
/32-inch plug
(not supplied, available at your local
RadioShack store) To connect a
headset, insert the headset’s plug into
the
EAR/MIC jack on the bottom of the
radio. Ô
DIRECT CALL
OPERATION
The Direct Call data includes the
transmitter ID and receiver ID
information. You can use the
transmitter to select the receiver radio’s
ID number you want to call, and the
receiver radio only receives the Direct
Call data you select. The Direct Call
Ô NOTE Ô
Using a Headset
• Do not change your
headset’s mode
(VOX or PTT) while
the radio is in use. Be
sure to switch your
radio off to reset it
before switching
between VOX and
PTT.
• When you turn on
VOX after you
connect a headset to
the radio, the VOX
level is set to level 4.
If VOX is set to
another level, the
VOX will remain at
that level.
Direct Call
Operation
If a channel is being
used by another user,
your radio might miss
Caller ID messages due
to RF interference.