Owner`s manual

16
Press
PTT to temporarily turn off Vox.
VOX stops flashing. Press PTT again to
turn on Vox.
VOX flashes.
USING APO
You can set the radio to automatically
turn off when the radio is idle (no key is
pressed and nothing is transmitted or
received) for 30, 60 or 90 minutes. To
turn APO (Automatic Power Off) on/off,
continually press
MENU key until APO
and 30, 60, 90 or OFF appears, press
e
or
d
to select the desired amount of
time or
OFF.IfyouselectOFF, the radio
does not automatically turn off. Before
the radio shuts off, it beeps and vibrates.
To activate the radio, press any key.
Make sure the radio is set to
ON by
setting the rotary switch to on. The radio
beeps and vibrates when you turn it on.
USING HI/LO
TRANSMITTER POWER
You can set the radio transmit power to
0.5W or 1.5W. The transmit power of
channels 8–14 is fixed at 0.5W only
(FRS channel). To select 1.5W transmit
power, make sure that the channel is
not on channels 8–14 and then press
MENU until Lo appears. If you select
OFF, the radio transmit power is 1.5W;
select
ON to set the transmit power to
0.5W. Ô
Ô NOTE Ô
Using Hi/Lo
Transmitter Power
The Hi/Lo transmit
selection is not available
when using FRS
Channels 8–14.