Installation manual

Function 6: Recording IVX 128

I.4

Function 633: MOH volume

If a custom MOH is recorded, the output volume can be adjusted in this function.

Range:

1 (faint)–12 (loudest).

Default:

Note:

If an external audio source such as a radio is used for MOH, adjust the volume at

the source.

Note:

To turn

live

MOH volume completely off, turn off volume at the source.

To turn

recorded

MOH volume completely off, select (in Function 631,

above

) one of the

prompts in the range of 594–598, but make sure it’s blank. These prompts are blank by de-

fault; if you have recorded some audio on all of them, just select one and record a few

seconds of silence.