Installation manual

IVX 128 Function 3: Extension programming
F.9
Function 35: Extension button mapping
By default, the programmable feature keys’ initial state is “not programmed” (except in the case of
station 100, on which the upper left key is a day/night key). Use this function to change the
programmable feature keys
system-wide.
Users can later change the programmable feature key
positions for
their
stations as part of station programming.
Important:
Future, system-wide changes made later here by the Installer will overwrite
any
sta-
tion user programming.
When prompted, press the desired programmable feature key location, then enter the appropriate
digits on the dialpad and confirm by again pressing the same programmable feature key.
To determine how a programmable feature key is currently programmed, press the key, note how it
is programmed, and press the key again.
The keys can be programmed as follows:
CO line key
If the dialed digits are 1–62, the key will serve as a CO line key.
Note:
Removing the line key appearances will set the station(s) to operate as a PBX with line ac-
cess by dialing
9
(or
8
or
71–76
).
Station key
If the digits entered constitute a three-digit extension number (or department, guest mailbox, etc.),
the key will become a station key providing the appropriate lamp information (See “System fixed
numbering plan,” page C.3).
Department pilots’ numbers (290–299) programmed here will appear on all phones; however,
agent log-on keys (5290–5299) will appear only at the phones of assigned agents in the corre-
sponding ACD department.
Guest/info mailboxes (300–489) and group mailboxes (500–516) can be assigned here to appear
on all phones. However, messages being left in these will not cause lamp appearances. (For more
on the different kinds of mailboxes, see “Voice mail programming,” beginning on page H.1.)
Speed-dial key
If one enters
9
(or
8
or
71–76
) plus a phone number, the key will become a speed-dial key for
outside calls. Alternatively, the user may enter the system speed-dial bin (600–699).
(This Function continued on next page.)