Installation manual

Function 3: Extension programming IVX 128
F.2
4. CO line group
Assigns the extension’s ability to access one
or more
CO line groups (9, 8, and 71–76).
Default:
9.
5. and 6. Call forward busy/no answer
The extension can be set to call forward busy/no answer to another extension (or department), a
mailbox or a branch ID for day mode and differently for night mode.
Default:
The extension’s mailbox.
7. Extension page zone assignment
List the page zones (1, 2, 3) that are to include this extension. All stations are in All Page and can-
not be edited.
Default:
0 (All page).
The overhead paging port (extension 199) can be paged along with other extensions in a zone by
including the desired page zone(s) for extension 199.
All
digital phone extensions are included in (and cannot be removed from) the all-page zone.
Analog extensions cannot be included in page zones.
8. Operator translation
Extension 0 (Operator) programming requires:
• Programming call forwarding for day and night mode
• Entering the extension number to which calls are to be directed when someone dials
0
.
Default:
100.
Analog ports
The last four station ports on a 684 port card, and all 12 ports on an A12 port card, are analog
ports and can be programmed only as follows:
1. 2. 3. 4. 5. 6.
Ext. Type Name CO CF day CF night
0
Operator X100 X100
100
DIGITAL Jane 9 MB100 X105
101
DIGITAL Roger 9 MB101 MB101
102
DIGITAL Sally 9,8 MB102 MB102
109
EXT Roger 2 9 MB106 MB106
110
FAX/MODEM/
RINGER/DOOR
FAX/MODEM/
RINGER/DOOR
9 ID9999 ID9999