Installation manual

IVX 128 Function 1: System parameters
D.5
Function 18: Serial maintenance port baud rate
The system’s serial ports are dedicated to SMDR and maintenance.
SMDR port
(Called “Port 1” in system display.)
Real-time SMDR call records are continuously output to the SMDR port.
Range:
Programmable for 300, 1,200, 2,400, 4,800, 9,600, 19,200, or 38,400 bps.
Default: 38.4K.
Maintenance port
(Called “Port 2” in system display.)
A laptop PC can be connected to this port for on-line programming and diagnostics. Reports gener-
ated in Function 7 are also output to this port.
Range:
Programmable for 300, 1,200, 2,400, 4,800, 9,600, 19,200, or 38,400 bps.
Default: 38.4K.
1.
Select the baud rate by pressing a scroll key (▼ or ▲) until the desired rate is displayed.
2.
Press
#
to confirm.