Installation manual

Function 1: System parameters IVX 128
D.4
Function 17: System speed-dial
Up to 100 system speed dial names and associated numbers can be stored, in location numbers
600–699, for access by any station. A user can initiate a system speed-dial by dialing the speed
dial location number or by accessing the name through the Esi-Dex feature. In Function 32, access
to system speed-dial can be denied to individual stations (see page F.6).
Note:
System speed-dialing overrides toll restrictions (Function 32, page F.6).
1.
Enter the 3-digit location number to program,
2.
Enter a
ten-character
name (see “Entering alphanumeric characters,” page C.2).
3.
Enter the number to be dialed (including the line group 9, 8, or 71–76). Press
the
left scroll key
(▼) to delete any character or digit entered in error. Here’s an example:
1. 2. 3.
Location no. Name Number
601 AUTO RENTL 915552221212
The number dialed in step 3 can be up to 30 digits long
including
the following special codes:
Code What it produces
# # DTMF tone
*
* DTMF tone
F Flash hook
P 2-second pause
To insert a special code, press the right
SCROLL
Key to select the desired special code:
# , * , F
or
P
.
Press
#
to confirm the inserted character and continue. Press
# #
to complete the entry.
Example:
To create a System Speed Dial number that dials
9
, then
972-555-5644
, then pauses
for 4 seconds and finally dials
#104
, enter:
9 9 7 2 5 5 5 5 6 4 4
(
scroll
to)
P #
(
scroll
to)
P #
(
scroll
to)
“#”
#
1 0 4
#
Deleting a speed dial number
To delete an entire speed dial number and name, delete the location number (
6 X X
) by pressing
HOLD
or the left scroll key (▼) during step 1 in the speed-dialing procedure
described above.