Operating instructions

MFJ-933 Loop Tuner
TM
Instruction & Technical Manual
- 14 -
SYSTEM SETUP
SYSTEM SETUP CONFIGURATION
The MFJ-933 Loop Tuner
TM
setup configuration is simple and consists of the
following components:
• RF Generator (Transmitter/Transceiver; ~5 Watts minimum)
• SWR/Wattmeter
• MFJ-933 Loop Tuner
TM
• Coaxial cable(s)
• #10 gauge (or larger) stranded wire cut to approximately 75% of a ¼
wavelength at the chosen resonant frequency
Figure 6 is a block diagram of the typical MFJ-933 Loop Tuner
TM
setup
configuration.
Figure 6 Typical MFJ-933 Loop Tuner
TM
Configuration
Transmitter/
Transceiver
SWR/
Wattmeter
Matching
Network
Loop
MFJ – 933 Loop Tuner