Basic Remote
Safety Instructions You must keep safety in mind while using this device. Keep these and any other instructions for future reference. Observe Warnings: Carefully follow all warnings on the device and in the operating instructions. Heat: Do NOT place the device near heat sources such as radiators, stoves, heat registers, or other appliances that produce heat. Care and Use Cleaning: Do NOT use liquid, abrasive, solvent, or aerosol cleaners. Use a damp cloth for cleaning.
SAT Mode SAT Power Controls satellite receiver DVR Goes to list of recorded programs Red Light Assists in programming mode TV Power Controls TV GUIDE Displays current and future satellite program listings CANCEL Returns to previous menu or to watching a program INFO Retrieves information on programs DVR Pauses live TV and plays or records programming RECALL Returns to the last channel viewed Channel Up/Down Navigates through channels MENU Accesses features and settings Arrows/OK Buttons Navigates through
DVR Functions Note: DVR Functions only work with DISH Network receivers that support DVR. Press twice to go to list of recorded programs. Pauses or plays a live or recorded program. Stops recording a program. Records a program. Press and release to skip backward through recorded programs. Press and hold before releasing to rewind quickly (x4). If pressed and released once in rewind mode, rewinding video increases to second speed (x60). Press and release to skip forward through recorded programs.
Insert the Batteries 1 2 3 Remove the remote battery cover. Insert 4 AA batteries, making sure to match the plus (+) ends with the plus markings on the battery case. Replace the remote battery cover. With the cover at a slight angle, line up the tabs and push down on the cover until it is in place. Making the Remote Work with the Receiver 1 2 Press the POWER button on the receiver’s front panel. Confirm remote operates the receiver by pressing other remote buttons.
Programming Remote to Control TV (Entering a TV code) 1 2 3 Turn TV and receiver on. TV Codes These tables contain the manufacturer codes for programming the remote control to operate your TV. Every attempt has been made to include all codes. If your equipment brand is not listed or if the codes do not work, the remote may not control your equipment. In some cases codes may operate some but not all buttons shown in this guide.
Programming Remote to Control TV (Entering a TV code continued) 6 Press and release TV POWER to turn off the TV. If TV turns off, continue to step 7. If the TV does not turn off, go to Step 8. 7 Turn the TV on and try other buttons to make sure they work. If the other buttons work, stop here. If they do not work, continue to Step 8. 8 9 TV Codes These tables contain the manufacturer codes for programming the remote control to operate your TV. Every attempt has been made to include all codes.
Programming Remote to Control TV (Automatically finding a TV code) Note: Only use Automatically finding a TV code if you were unable to find a code using Entering a TV code. 1 Turn TV and receiver on. 2 Press and hold TV POWER until red light comes on. Release TV POWER. Red light blinks. 3 4 Press and release TV POWER. Red light stays on. 5 6 Press and release UP ARROW slowly. Red light goes out and comes back on. If the TV turns off, continue to Step 5.
Displaying TV Code To identify the TV code that your Basic Remote is using, complete the following steps: 1 Press and hold TV POWER until red light comes on. Release TV POWER. Red light blinks. Press and release OK twice. 2 The red light blinks a number of times corresponding to the value of the stored TV code. For example, if the stored TV code is 593, the red light blinks five times, pauses, blinks nine times, pauses, and blinks three times.
SAT Auto-Tune SAT Auto-Tune programs into the remote control the correct TV channel used for viewing your paid programming. If you are experiencing fuzzy, blue, or black screens, it might be due to the TV being set to the wrong channel. Using the SAT Auto-Tune feature helps prevent fuzzy, blue, or black screens from occurring. When TV POWER is pressed and released, the remote sends that channel to the TV, ensuring that the TV is on the correct channel for viewing your paid programming.
Disabling SAT Auto-Tune Channel If you decide that you do not want the TV programmed to the TV channel used for viewing your paid programming, follow the steps below to disable SAT Auto-Tune. This only needs to be done if you followed the steps for Setting SAT Auto-Tune Channel on page 8. 1 Press and hold TV POWER until red light comes on. Release TV POWER. 2 Press and release RECALL. 3 Enter 000. 4 Press and release OK.
Using System Wizard Note: System Wizard only works with some receivers. Use System Wizard to store/restore your remote settings. If your batteries are low, replace them before beginning. 1 Press and hold 0 until System Wizard message appears. Release 0. Make sure remote and receiver are in line of sight. 2 Select Continue to return to Live TV.
TV Codes These tables contain the manufacturer codes for programming the remote control to operate your TV. Every attempt has been made to include all codes. If your equipment brand is not listed or if the codes do not work, the remote may not control your equipment. In some cases, codes may operate some but not all buttons shown in this guide.
TV Codes, continued Belcor 505 627 773 Bell & Howell 590 611 675 Benq 073 112 511 535 Bradford 541 657 682 Brillian 091 092 093 558 Brockwood 505 627 Broksonic 213 533 622 648 682 726 748 750 752 754 834 865 866 899 908 914 980 ByD:sign 109 792 Cadia 098 Candle 506 523 536 627 654 929 933 Canon 036 135 282 Capehart 627 Carnivale 506 627 Carver 621 656 674 761 792 818 897 968 Casio 083 CCE 528 816 978 990 Celebrity 500 640 652 677 758 781 783 795 797 798 837 844 Celera 743 744 745 815 Champion 130 Changhong
TV Codes, continued Curtis Mathes 003 028 215 503 506 516 521 528 530 531 572 590 611 621 627 641 645 650 654 655 656 658 674 675 680 697 702 719 738 739 740 749 755 761 776 792 794 818 830 832 863 864 897 933 953 966 CXC 541 657 682 CyberHome 037 CyberPower 721 Cytron 537 539 550 903 904 Daewoo 015 016 505 524 528 530 531 590 611 627 630 653 654 655 658 664 684 697 702 719 727 778 816 832 853 935 942 Daytron 505 627 654 658 Dell 080 137 518 676 772 773 774 Denon 007 786 953 Denstar 011 DiamondVision 546 64
TV Codes, continued Envision 042 131 235 506 519 620 627 654 Epson 102 708 Erae 089 ESA 527 569 587 601 618 632 646 679 694 733 767 777 829 838 839 841 846 Fisher 590 595 611 FlexVision 020 Fujitsu 041 532 536 602 603 694 Funai 095 212 228 500 527 532 541 569 587 618 640 657 677 679 682 694 733 756 758 777 781 783 795 797 798 829 837 838 839 841 844 846 Futuretech 541 657 682 694 Gateway 070 071 072 507 511 535 581 609 710 721 746 753 763 801 GE 028 214 215 216 270 920 922 924 950 984 987 General Electric 5
TV Codes, continued Hisense 111 169 241 269 759 Hitachi 123 212 517 523 547 549 554 555 606 627 637 638 654 655 658 675 688 709 756 786 788 789 790 791 926 927 933 943 945 953 957 970 984 997 998 Howard Computers 721 HP 074 075 076 146 599 712 721 911 Hyundai 087 103 695 I-Inc 189 iBUYPOWER 721 Ilo 177 529 559 588 596 625 668 764 IMA 657 Infinity 621 656 674 761 792 818 897 InFocus 031 148 252 616 Initial 596 625 Insignia 082 149 167 169 181 211 240 272 273 527 533 537 538 539 543 550 553 569 585 618 679 69
TV Codes, continued LG 002 047 056 080 115 196 221 501 503 522 545 553 564 615 627 650 653 654 693 711 718 720 730 766 773 775 779 804 805 809 813 830 831 859 Linksys 721 LiteOn 074 Lloyd’s 212 627 756 Lloytron 658 Loewe 656 761 897 951 Logik 675 Luce 052 699 Luxman 523 627 654 933 LXI 028 503 526 564 590 595 611 621 627 631 635 645 650 654 656 674 718 744 749 761 768 771 776 785 792 818 830 863 864 897 955 M.
TV Codes, continued Minutz 920 Mitsubishi 051 058 134 150 214 504 505 517 521 564 572 613 614 627 653 654 688 718 725 739 740 787 799 918 946 959 991 992 Mitsui 769 Monivision 692 804 Montgomery Ward 675 Motorola 050 521 572 739 740 835 Moxell 050 MTC 505 506 516 523 627 653 654 680 930 933 942 975 977 Multitech 541 657 682 930 978 Multivision 810 NAD 057 079 526 564 595 627 631 635 637 654 718 744 768 771 785 933 Nakamichi 145 Naxa 233 NEC 006 066 505 506 517 523 604 608 610 627 653 654 687 688 731 732 904
TV Codes, continued Panasonic 014 110 215 218 508 509 512 576 577 619 634 644 647 656 685 689 700 729 734 761 765 780 784 811 819 820 821 822 823 860 861 862 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 889 890 895 896 897 900 964 979 Panavision 734 811 PDI 142 Penney 028 215 219 526 564 595 627 631 635 645 650 655 658 661 681 702 718 720 744 749 768 771 776 785 863 864 913 914 920 922 926 949 950 956 Petters 534 Philco 505 506 527 529 532 536 559 569 618 621 627 653 654 6
TV Codes, continued Proview 050 591 669 902 Proxima 024 025 026 027 Pulsar 501 505 627 711 775 813 Puneet 152 Pvision 089 Quasar 014 215 218 508 512 577 619 634 685 689 700 729 734 765 780 784 819 820 821 822 823 860 861 862 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 889 890 895 896 965 Quanta 072 Radio Shack 028 212 503 505 506 541 564 590 611 627 645 650 682 702 718 749 756 776 830 863 864 926 933 965 997 Radio Shack/Realistic 503 590 627 645 654 655 657 658 830 RCA 02
TV Codes, continued Scott 182 505 532 541 564 627 654 655 657 658 682 718 980 Sears 028 212 219 503 523 526 527 532 558 564 569 590 595 611 621 627 631 635 645 650 654 656 658 674 694 718 733 744 749 756 761 768 771 776 785 792 818 830 841 846 863 864 897 933 954 955 956 986 Seimitsu 627 Semivox 682 Semp 595 771 Sharp 005 214 277 521 546 556 572 605 627 628 629 654 655 658 663 702 739 740 803 835 836 898 958 960 965 986 995 Sharper Image 703 Sheng Chia 521 572 739 740 Sherwood 136 Shogun 505 627 Signature 6
TV Codes, continued Symphonic 212 527 541 569 587 632 646 657 679 682 694 733 756 767 841 846 Syntax 077 523 564 566 578 580 654 910 Syntax-Brillian 558 564 Systemax 721 Tagar Systems 721 Tandy 521 572 739 740 835 Tashiko 009 Tatung 076 100 101 129 511 535 588 914 930 Teac 586 Technics 508 512 577 619 634 685 689 700 729 734 765 780 784 819 820 821 822 823 Technol ACE 532 Techview 055 234 590 Techwood 508 523 627 654 914 933 Teco 704 Teknika 504 505 512 516 523 524 532 536 541 613 621 627 644 653 654 655 65
TV Codes, continued Viewsonic 118 121 155 187 235 507 551 562 575 579 581 582 583 600 606 609 620 710 721 741 746 753 760 763 789 796 801 Viking 929 989 Viore 177 203 242 683 907 Visart 119 Vistron 246 Vizio 511 535 551 562 575 583 593 598 741 773 Voodoo 721 Wards 057 079 501 503 508 516 526 532 536 541 564 590 595 611 621 627 631 635 640 641 645 653 654 656 657 674 675 677 681 682 711 718 749 758 761 768 775 776 781 783 785 792 797 798 813 818 830 837 844 863 864 897 919 920 921 922 923 924 933 939 944 965
Troubleshooting Use this information if you have a problem using the remote. To solve a particular problem, do the following: • Find the information that relates to the problem you are experiencing. Try the suggested solution for that problem. • Make sure your remote control has fresh batteries. If you see the Remote Battery Low warning on your TV screen, it is time to change the batteries. Follow the instructions on page 3. • Make sure you have a direct line of sight between the remote and the receiver.
Troubleshooting, continued When you try to enter TV programming mode, the red light comes on and blinks eight times when TV POWER is released. What to do: Replace the batteries (see page 3). Your remote control does not work well. What to do: Move your receiver to different locations. For best results, place the receiver as high as possible, above all other equipment in your entertainment center. There may be IR interference from objects near the receiver. Your picture is fuzzy (or black or blue).
Limited Warranty This Limited Warranty is a legal document. Keep it in a safe place. Remember to keep your Sales Receipt for warranty service. We will consider any items you return without a copy of the Proof of Purchase to be out of warranty. This warranty extends only to the original user (“you,” “your”) of the DISH Network remote control and is limited to the purchase price of the remote control. EchoStar Technologies L.L.C.
Accessory Warranty An accessory is any DISH Network branded equipment, displaying the DISH Network logo, excluding the receiver, Smart Card, cables and hookups, and non-mechanical components. A one-year warranty becomes effective upon the activation of the DISH system or date of purchase, if bought separately. If an accessory has an expired warranty, you may purchase a replacement from DISH Network or your local retailer.
If You Need Help 1. Review this User Guide. 2. See Troubleshooting on page 23. 3. Visit www.dishnetwork.com/chat for 24/7 support. 4. Call the Customer Service Center at 1-800-894-9131.
Regulatory Factors This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this device may void your authority to operate this equipment.
Reference Table Write down your channel numbers/inputs and TV codes as you program them for future reference.
For all your customer needs, go to www.dishnetwork.
