Owner`s manual

USING THE MENU

Your HTX-212 has a menu that lets you select the way some of its func-

tions work. The previous sections have included procedures that access

this menu—this section provides an overview. Follow these steps to use

the menu:

1. Press VFO.

2. Hold F for at least 1 second. FUNC flashes.

3. Press MR. The first menu item appears.

4. Press s or t to select the desired menu option.

5. Rotate TUNE, or press UP or DOWN on the microphone, to select

the option setting. For options that require a frequency (such as

scan skip), you can use the microphone keypad to directly enter the

frequency’s last five digits.

6. Press MR. The HTX-212 saves the settings.

Item

Default

Option

Explanation/Available Settings Page #

SC ti Scan resume option.

ti—time out in 10 seconds.

Cr—resume after carrier drops.

SE—do not resume scanning.

Sd 2.0 Scan delay (delay before resume when SC

is set to Cr). 0.5, 1, 2, or 4.

S1 –––.––– Scan skip frequency 1 (frequency for HTX-

212 to skip when scanning VFO).

S2 –––.––– Scan skip frequency 2. 21

S3 –––.––– Scan skip frequency 3. 21

S4 –––.––– Scan skip frequency 4. 21

S5 –––.––– Scan skip frequency 5. 21

Lb 4 Look-back time (how often the HTX-212

checks Priority Memory Channel 1 for a

transmission when the alarm is activated).

4, 8, 12, or 16.

Ar oFF Auto reply (controls whether the HTX-212

transmits a DTMF memory sequence

when it is DTMF paged). oFF or on.

SL 144.000 Lower scan limit. With SH, determines the

VFO scanning range.

SH 148.000 Upper scan limit. 23

to oFF Time-out option (sets whether the HTX-

212 limits transmissions to 3 minutes). oFF

or on.

bp oN Keytone beep option. 25

19-1125.fm Page 35 Tuesday, August 3, 1999 9:47 AM