Service manual

PRO-94 Tutorial: Setting and Testing the WX (Weather) Alert
This tutorial shows you how to turn on and test the SAME (Specific Area Message Encoding) alert feature. The scanner displays this data as
codes corresponding to the levels of severity (L1, L2, and L3).
For additional information on this product, see the links below:
● 20-524 PRO-94 User's Manual
● 20-524A PRO-94 User's Manual
● Scanner Basics
● Scanner FAQ's
Step 1: Selecting the Weather Search Mode
Pro94-keypad-SVC(E)
Press SVC (E) and select the weather search mode. A small black square will be displayed over WX if weather has been properly selected. The
scanner will automatically search the weather frequencies until it finds a station. If the black square is not positioned over WX, repeatedly press
SVC (E) until it is.
Step 2: Initiating Alert Mode
Press ALT (DATA). ALERT appears on the display. The audio is muted until the scanner receives a SAME-coded signal.
Step 3: Receiving an Alert Signal