Service manual

wx-ham-mrn-air-pol-157.400-l/o-HOLD-SEARCH
To review the skipped frequencies, press HOLD to stop the search, and then press and release UP or DOWN to step through the frequencies
while HOLD appears. L/O appears when you select a skipped frequency, indicating that the frequency is locked out.
Step 3: Removing a Frequency from Skip
To clear a single frequency from skip memory so that the scanner will stop on it during a limit, direct, or service bank search, press HOLD (A/B) to
stop the search.
Step 4: Selecting the Frequency To Remove from Skip
Press and release UP or DOWN to select the frequency. L/O appears in the display to indicate that the frequency is locked out.
Step 5: Turning Skip Off for the Frequency