Service manual

PRO-94 Tutorial: Using Search Skip Memory
You can skip up to 50 specified frequencies during a limit or direct search and up to 20 specified frequencies during a service bank search. This
lets you avoid unwanted frequencies or those already stored in a channel. For information on getting into and using these search modes, see the
Limit Search Tutorial, the Direct Search Tutorial, or the Service Bank Search Tutorial. This tutorial starts with the scanner in the Marine (MRN)
service bank search mode.
Note: You cannot skip frequencies during WX service search.
For additional information on this product, see the links below:
● 20-524 PRO-94 User's Manual
● 20-524A PRO-94 User's Manual
● Scanner Basics
● Scanner FAQ's
Step 1: Skipping a Frequency
To skip a frequency, press S/S (L-OUT) when the scanner stops on the frequency during a limit, direct, or service search. The scanner stores the
frequency in memory and automatically resumes the search.
See the next step to review the skipped frequencies.
See
Steps 3 through 5 to remove a single frequency from skip memory.
See
Step 6 to clear all frequencies from skip memory.
Notes:
● If you select all frequencies to be skipped within the search range, the scanner beeps 3 times and does not search.
● If you select more than 50 frequencies to skip, each new frequency replaces a previously stored frequency, beginning with the first stored
frequency.
Step 2: Reviewing the Skipped Frequencies