Service manual

BankA-TRUNK-M-2ch-000.000-PGM

Press PROG or the UP arrow key to select the next channel in the bank. Repeat from Step 5 until you enter all the desired frequencies in that

bank.

Step 8: Activating Trunk Scan and Search

Pro94-keypad-SRC(LIMIT)

Press SRC to begin searching for the trunk's data channel (the channel that controls the trunk). SEARCH flashes in the lower right corner as the

scanner searches for the data channel.

Note: As the scanner looks through the frequencies, you will see them on the display. You must have a data channel stored in your trunk

channels or the scanner will not trunk. After it finds the data frequency, it will trunk between talk groups.