Service manual

Use the number keys (0-9) to enter a valid frequency within the trunk system.
Click Here for the Police Call Frequency Lists on CD
Step 6: Storing the Frequency within the Trunk System
Pro94-keypad-SVC(E)
Press E (SVC). Bank A and the bank number (1), the channel number, and E (EDACS) or M (Motorola) appears depending upon the trunk
system selected.
Notes:
● If you enter an invalid frequency (outside the selected range), the scanner beeps, the channel number flashes and ERROR appears. If this
happens, press MON/CLR (.) to clear the frequency, then repeat the entry.
● For EDACS systems, you must enter the frequencies in logical channel number (LCN) order.
● If you try to enter a duplicate frequency in a bank, the scanner beeps and the channel which was previously stored appears.
● It is very important that you enter all the listed frequencies for the selected agency in Step 3. Otherwise, trunking will not occur when you
press E (SRC).
Step 7: Storing Additional Frequencies