Service manual

PRO-94 Tutorial: Moving a Frequency From a Monitor Memory to a Channel
This tutorial shows how to move the frequencies you have stored in monitor memory to a channel. In this example, we are moving frequency
864.925 from monitor memory 3 to channel 6.
For additional information on this product, see the links below:
● 20-524 PRO-94 User's Manual
● 20-524A PRO-94 User's Manual
● Scanner Basics
● Scanner FAQ's
Step 1: Selecting Manual Mode
Pro94-keypad-MAN
Press MAN. MAN appears in the display.
Step 2: Entering the Channel Number
BankA-1ch-6-MAN
Enter the number (0-9) of the desired target channel where you want move to the frequency that is stored in the monitor memory. For our
example, you will press 6.
Step 3: Entering Program Mode