Service manual

PRO-94 Tutorial: Limit Search
A Limit Search lets you search with a specific range of frequencies. -L- appears during a limit search. This tutorial will show you how to set a low
frequency and high frequency and then search between those frequencies. Our example shows a search between 822.7375 MHz and 867.8875
MHz.
For additional information on this product, see the links below:
● 200-0524 PRO-94 User's Manual
● 200-0524A PRO-94 User's Manual
● Scanner Basics
● Scanner FAQ's
Step 1: Entering Programming Mode
Pro94-keypad-PROG
Press PROG. PGM will appear on the display.
Step 2: Setting the Lower Limit
Pro94-keypad-SRC(LIMIT)
Press LIMIT (SRC). Lo and 29.000 MHz (or the previous low limit frequency) will appear on the display. 29.000 MHz is the low end of the
scanner's range.
Step 3: Entering the Low Frequency