Service manual

BankA-1ch-866.1625-PGM
Pro94-keypad-SVC(E)
Press E (SVC) to the store the frequency into the channel.
Step 7: Clearing a Mistake
If you entered an invalid frequency in Step 5, Error appears and the scanner beeps three times. Use the number keys (0-9) to enter a valid
frequency.
Step 8: Storing the Delay Setting
Press DELAY to pause scanning 2 seconds after the end of a transmission before scanning proceeds to the next channel. The scanner stores the
setting for each channel individually. When delay is set to "on", DLY will appear on display as above. The rest of the tutorial is in the delay "off"
mode. You will need to press DELAY again to remove DLY.
Step 9: Programming Additional Frequencies