Service manual
Answer: The PC interface for the PRO-93 is not available, and it will not work with any of our currently-available interfaces. While this software
is in development, we do not have a due date; however, it is currently expected to be sold under part number 940-1666. When the interface is
available, it will be listed on our website.
A cable and software which will work with the PRO-93 is available on-line through
http://www.pro93.com/. Please note: this website is not
associated with RadioShack Corporation.
Back to Index Back to Top of Section 4
Product: PRO-94 Scanner Cat. No.: 200-0524
Question: What are the differences between the PRO-92 (Cat. No. 200-0522) and the PRO-94 (Cat. No. 200-0524) Scanners?
Answer: The differences are outlined below:
PRO-92 / 200-0522 PRO-94 / 200-0524
Trunk Scanning Type Multi-Trunk Scanning (allows
simultaneous scanning of up to 10
trunked systems or trunked and analog
systems)
Single-Trunk Scanning (can scan one
system at a time)
Trunking Type Multi-Trunking: Scans Analog Motorola
I, II, I/II; GE/Ericsson (EDACS) and
Johnson/Uniden systems
Dual-Trunking: Scans Analog Motorola
I, II, I/II and GE/Ericsson (EDACS)
Channels 500 Channels 1000 Channels
Frequencies 29-54 MHz, 108-174 MHz, 380-512
MHz, 806-960 MHz (excluding cellular)
29-54 MHz, 108-174 MHz, 216-225
MHz, 406-512 MHz, 806-960 MHz
(excluding cellular), 1240-1300 MHz
SAME (Specific Area
Message Encoding)
Weather alert with display Weather alert, no display
CTCSS/DSC Decode Yes No
Cloning Interface (with
optional cable)
Yes No
Display 4-line, displays frequency,
alphanumeric name
1-line (fixed indicators), displays
frequency
Back to Index Back to Top of Section 4
Product: PRO-94 Scanner Cat. No.: 200-0524
Question: Between the PRO-92 and PRO-94, which has the better scanning scheme?
Answer: In our testing, we placed a PRO-94 side by side with a PRO-92 and found each radio missed a few (and only a few) hops. The missed
hops were about the same - neither radio got everything. The significant difference was that if the PRO-94 model holds on a specific ID and
misses a hop, the hop is completely missed, where the PRO-92 typically picks it back up after a second of delay. The reason for this is that the
PRO-94 scheme looks only at the data channel; if it misses the data, that transmission is completely lost. In contrast, the PRO-92 reads the
subaudible data on each transmission. If it misses the hop, it continues to check active channels and easily finds the conversation again.
While the schemes are different, we did not find that either design was significantly better than the other.
Back to Index Back to Top of Section 4
Product: PRO-94 Scanner Cat. No.: 200-0524
Question: How do I calculate Base Frequency? I am looking for the mathematical formula used to calculate the BASE frequency as required.
Answer: We do not have this information. If it is available to the public, you may be able to get what you want by searching the Motorola (or
applicable) patents.
Back to Index Back to Top of Section 4
Product: PRO-94 Scanner Cat. No.: 200-0524
Question: How do I get the Software & Cable for this scanner?
Answer: The Cable and Software are sold separately. While the cable is sold under
260-0117, the software is not presently available.
Back to Index Back to Top of Section 4