Owner`s manual

MONITOR - accesses the 100 monitor memories.
TUNING Knob - turn to tune through channels or frequencies.
SCAN - scans through the channels.
MANUAL - stops scanning to let you directly enter a channel
number.
TUNE - lets you use the scanner's rotary tuner to tune
through frequencies.
PROGRAM - programs frequencies into channels.
AUTO - lets you automatically program frequencies into
channels.
ENTER - enters frequencies into channels.
A LOOK AT THE DISPLAY
The display has indicators that show the scanner's curr ent operating mode.
A good look at the display will help you understand the scanner.
SCAN - appears when you scan channels.
BANK - appears with numbers (1-10). Numbers with a bar under
them show which ch annel-storage banks are turned on
for scanning. See "Understanding Channel -Storage
Banks."
SEARCH BANK - appears with numbers (1-10). Numbers with a bar under
them show which search b anks are turned on for a limit
search.
TUNE - appears when you press TUNE to use the scanner's
rotary tuner.
MANUAL - appears when you manually select a channel.
WX - appears when you scan the ten preprogrammed weather
band channels.
AUTO - appears when the scanner automatically stores
frequencies in channels.
SEARCH - appears during a direct search and a limit search.
UP AND DOWN ARROWS - appears when the scanner is scanning, when you press
the UP or DOWN ARROW while the scanner is in limit or
direct search, when you tune through weather channels,
or when you store frequencies.
P - appears when the scanner is set to the priority
channel.
CH - appears with a number (1-1000) to show which of the
scanner's 1,000 channe ls it is tuned to.
MHz - appears with digits to show which frequency the
scanner is currently tuned to.